Trade show booth sizes, compared to scale

Exhibit halls are laid out on a ten-foot grid, and every booth on the floor is some multiple of a 10 × 10 square. Eight of those multiples come up often enough to have their own conventions. The plans below are all drawn at one scale, so a 30 × 40 really is twelve times the 10 × 10.

An exhibit hall seen from above: a long row of small single inline booths along one side, a wider inline booth mid-floor, and a large open island booth with a circular illuminated hanging sign, showing the size difference between footprints.

The eight footprints

10 ft 10 ft

Inline · 100 sq ft

10 × 10 inline

The standard entry footprint. One back wall, neighbours on both sides, and the size where renting is the easiest call to make. Renting a 10 × 10

20 ft 10 ft

Inline · 200 sq ft

10 × 20 inline

The most common step up, and the best value on the ladder: the second hundred square feet costs less than the first. Renting a 10 × 20

30 ft 10 ft

Inline · 300 sq ft

10 × 30 inline

The largest linear footprint, and the last priced without rigging. Three bays of frontage, but only ten feet of depth to work in. Renting a 10 × 30

20 ft 20 ft

Island · 400 sq ft

20 × 20 island

The first island. Four open sides, a hanging sign overhead, and the largest single jump in cost anywhere on the ladder. Renting a 20 × 20

30 ft 20 ft

Island · 600 sq ft

20 × 30 island

The first island with room for a genuinely private meeting room that does not strangle circulation around it. Renting a 20 × 30

40 ft 20 ft

Island · 800 sq ft

20 × 40 island

Forty feet of frontage on two aisles. Buys reach rather than depth, and the problem is keeping it reading as one exhibit. Renting a 20 × 40

30 ft 30 ft

Island · 900 sq ft

30 × 30 island

The most balanced island on a typical floor plan. Depth for enclosed space, mass to carry height, and no side acting as the back. Renting a 30 × 30

40 ft 30 ft

Island · 1,200 sq ft

30 × 40 island

The largest footprint most floor plans sell as one space, and where second storeys and dedicated hospitality become routine. Renting a 30 × 40

Every plan above shares one scale and one baseline, so the footprints compare directly against each other rather than each filling its own card.

Where inline ends and island begins

Size is the obvious difference between these footprints. The one that actually shapes your budget and your design is whether the space has neighbours.

Inline booths sit in a row

A linear space with neighbours on both sides and one side open to the aisle. You design against a back wall, height is capped low — commonly eight feet — and overhead signage is almost never permitted. Everything from a 10 × 10 to a 10 × 30 works this way.

Islands stand alone

Aisles on all four edges and no shared walls. There is no back to hide behind, so storage and cabling need designed homes, but you get far more height and a hanging sign to be found by. Islands start at 20 × 20.

The jump between them is the expensive one

Moving up within a category adds hardware and graphics. Crossing from linear to island adds rigging, engineering review, a bigger crew and multi-day install. It is the largest single cost step on the ladder, and it is why a 10 × 30 is often better value than a 20 × 20.

Choosing between them

Count your staff before your square feet

Space you cannot staff reads as a closed booth. Two people cannot hold a 20 × 40, and one person in a 10 × 20 leaves half of it looking empty all day. Size to the team you will actually send.

Decide whether you need to host

If closed-door conversations matter, you need depth, and depth means an island. The 20 × 30 is the first footprint where a real meeting room fits without strangling circulation around it.

Check what the floor plan sells

Not every show lays out every size. Thirty-foot linear runs in particular are missing from plenty of plans, and are sometimes assembled from adjacent spaces. Ask show management what is genuinely on the grid before designing for it.

Rent the exception, do not buy for it

If one flagship show needs an island and the rest are 10 × 10s, rent the island rather than buying for your maximum size. See rent vs. buy.

Whichever size you land on, the quote is built from the same six lines. The cost guide covers what they are and which ones first-time exhibitors routinely forget to budget for.

Common questions

What is the standard trade show booth size?

The 10 × 10 inline is the standard unit, and almost every floor plan is laid out on a ten-foot grid built from it. Larger spaces are multiples of that square: a 10 × 20 is two, a 20 × 20 island is four, and a 30 × 40 is twelve.

What is the difference between an inline booth and an island?

An inline booth sits in a row with neighbours on both sides and one side open to the aisle, so it is designed against a back wall and held to a low height limit. An island has aisles on all four edges, no shared walls, much greater permitted height, and usually a hanging sign. Islands begin at 20 × 20.

Which booth size gives the best value?

The 10 × 20 is the best value step up, because the fixed costs — artwork preparation, minimum drayage, the first labor block — are already paid at 10 × 10 and now spread across twice the booth. At the larger end, a 10 × 30 delivers three hundred square feet while still being priced as a linear booth, with no rigging to pay for.

How much floor space do I actually need?

Work backwards from headcount and function rather than budget. Roughly one staff member per hundred square feet keeps a booth looking alive, and any enclosed meeting room needs at least eighty square feet of its own before it stops feeling like a box. Add those together and you have your floor.

Can I rent any of these sizes, or only the small ones?

All of them. Rental inventory covers the full range, and at the larger footprints renting is actually the norm rather than the exception — a 1,200 sq ft exhibit is a substantial asset to warehouse, insure and refurbish between a handful of shows a year.

Tell us the footprint and we'll match you with vendors.

Get info